The powerful Fanmaster 50KW (170,600 BTU) Indirect Fired diesel heater produces an instantaneous heat that uses a flue system positioned on top of the heater to allow the fumes to escape which creates a cleaner dry heat which is ideal for confined spaces or areas with limited ventilation. Ducting can be attached to the flue to exhaust the fumes out. This unit must be used in well ventilated areas when not using the flue system and is for industrial use only
Unit functions on both Diesel or Kerosene
Run time 14hr
Danfoss Fuel Nozzle & Gear Pump
Two stage fuel filter
Stainless steel combustion chamber with fan cooling
Cut off protection; flame sensor; if no fuel heater will cut out
Portable on wheels
Part No. IDH2-50IN
Heat Output (K/W)(BTU) 50170,600
Heating Type Indirect Fired
Air Flow (L/S) 555
Motor (K/W) 0.75
Voltage 240
Current (A) 3.2
Plug Connection 3 Pin 10amp
Heating Area (m2) 500
Tank Size (L) 69
Consumption (L/H) 4.7
Pressure (PSI) 10.5
Fan Speed 1
Heat Settings 1
Weight (kg) 59/65
Dimensions (mm) (W)1370x(D)560x(H)995
Unit functions on both Diesel or Kerosene
Run time 14hr
Danfoss Fuel Nozzle & Gear Pump
Two stage fuel filter
Stainless steel combustion chamber with fan cooling
Cut off protection; flame sensor; if no fuel heater will cut out
Portable on wheels
Part No. IDH2-50IN
Heat Output (K/W)(BTU) 50170,600
Heating Type Indirect Fired
Air Flow (L/S) 555
Motor (K/W) 0.75
Voltage 240
Current (A) 3.2
Plug Connection 3 Pin 10amp
Heating Area (m2) 500
Tank Size (L) 69
Consumption (L/H) 4.7
Pressure (PSI) 10.5
Fan Speed 1
Heat Settings 1
Weight (kg) 59/65
Dimensions (mm) (W)1370x(D)560x(H)995